The Cinema FX2 Freecoaster hub is built for hard street sessions and technical fakie tricks. Its proven KHE-based internals offer adjustable slack from 55 to 180 degrees. A heat-treated 14 mm hollow chromoly axle provides stability, while the included nylon hub guards protect against grind damage. Available in black and silver, in either RHD or LHD versions.
PRODUKTHIGHLIGHTS:
KHE-based freecoaster system with adjustable slack from 55 to 180 degreesDTC system for changing the drive side by replacing the driverHeat-treated 14 mm chromoly hollow axle with 6 mm hex socket9T driver with two sealed bearings and an additional bushingCinema CR and DR nylon hubguards included
The Cinema FX2 Freecoaster hub brings control and flexibility to your street setup. Whether long fakies, technical lines, or hard grinds, the FX2 combines a proven freecoaster system with a robust construction.
Inside, a KHE-based mechanism operates with a 9T driver, two sealed driver bearings, and an additional bushing. The slack can be adjusted between 55 and 180 degrees using three adjustment washers. From the factory, the hub is set to 156 degrees.
The DTC system allows switching between right- and left-side drive by replacing the driver. A completely new hub is not required for this.
The 36-hole shell is made of 6061-T6 aluminum. In addition, there is a heat-treated 14 mm chromoly hollow axle with a 6 mm hex socket for easier maintenance.
The included Cinema CR and DR nylon hubguards protect both sides of the hub during grinds.
Available in black and silver, as well as in RHD or LHD versions.
Manufacturer: Cinema
Model: FX2 Freecoaster Hub
Product Type: BMX Rear Hub
Hub Type: Freecoaster
Mechanism: KHE-based
Clutch System: DTC (Dual Threaded Clutch)
Hub Shell: 6061-T6 Aluminum
Spoke Holes: 36
Axle Material: Chromoly Steel
Axle Diameter: 14 mm
Axle Design: Hollow Axle
Axle Heat Treatment: Heat-treated
Axle Tool Interface: 6 mm hex
Axle Nuts: Chromoly Steel
Axle Nut Size: 17 mm
Driver: 9-tooth
Driver Bearing Support: 2 sealed bearings and additional bushing
Bearings: 1 x 6002, 1 x 7905, 2 x 6902
Additional Bearing Support: Bushing
Drive Side: Right (RHD) or left (LHD)
Drive Side Change: By replacing the driver
Axle Cones: Threads on drive and non-drive sides
Hubguards: Cinema CR and DR nylon hubguards
Hubguard Included: Yes
Slack: Adjustable from 55 to 180 degrees
Stock Slack: 156 degrees
Slack Adjustment: 3 adjustment washers
Colors: Black, Silver
Weight: 25.3 oz (approx. 717 g) including mounted hubguards
Intended Use: BMX Street, Freestyle
1x rear wheel hub
Manufacturer information:
CINEMA BMX 40 Greenleaf Street
Rochester, NY 14609 USA info@cinemabmx.com - cinemabmx.com
Use this space to give more details about what’s being shown in the image — this could be product specifications, an event highlight, or an introduction to a collection.
