The Mission BMX headset is designed for BMX frames with an integrated 42 mm head tube and forks with a 1 1/8 inch steerer tube. The sealed press-fit bearings ensure protected bearing housing and smooth steering. A 20 mm high aluminum top cap completes the assembly. The headset is exclusively suitable for forks with an integrated crown race.
Note: without packaging/ may show signs of disassembly from a new bike
PRODUKTHIGHLIGHTS:
Integrated BMX headset for 42 mm steerer tubesSealed cartridge bearings with 45-degree bearing angle20 mm high aluminum cover capFor 1 1/8 inch BMX steerer tubesCompatible with forks with integrated crown race
The Mission BMX headset is designed for BMX frames with an integrated head tube and an inner diameter of 42 mm. It uses the Campagnolo IS standard and is designed for forks with a 1 1/8-inch steerer tube diameter.
Inside, sealed SB-Industrielager bearings with dimensions of 41.8 x 30.2 mm and a bearing angle of 45 x 45 degrees are used. The seals protect the bearings from dirt and moisture and support smooth steering movement in everyday BMX use.
The 20 mm high top cap is made of aluminum and forms the upper finish of the headset. Due to its height, it also influences the position of the stem components mounted above it.
Compatibility with the fork is important when choosing. The Mission headset is exclusively designed for BMX forks with an integrated fork crown. For forks without an integrated crown, this version is not suitable.
With a weight of approx. 75 g, the headset is suitable for street, park, and trail BMX bikes with a corresponding frame and fork mount.
Manufacturer: Mission BMX
Product type: BMX headset
Design: Integrated
Headset standard: Campagnolo IS
Steerer tube diameter: 42 mm
Steerer tube diameter: 1 1/8 inch (28.6 mm)
Bearing manufacturer: SB
Bearing type: Sealed cartridge bearings
Bearing dimensions: 41.8 x 30.2 mm
Bearing angle: 45 x 45 degrees
Top cap: Aluminum
Top cap height: 20 mm
Fork compatibility: Forks with integrated steerer cone
Weight: approx. 75 g
Use this space to give more details about what’s being shown in the image — this could be product specifications, an event highlight, or an introduction to a collection.
